β of exterior quality coefficient
- Time:
- Click:69
- source:TAMIKO CNC Machining
5 tall stress center K σ > 1.
Thick car of 54008001200 grinding turning is raw face 0.
4 ~ 0.
23.
2 ~ 0.
825 ~ 6.
3 ~ 10.
950.
850.
7510.
900.
800.
6510.
800.
650.
45 high frequency quench 800800 ~ of 600 ~ 10001.
5 ~ 1.
71.
3 ~ 1.
51.
6 ~ 1.
72.
4 ~ 2.
8 nitrogen change 900 ~ 12001.
1 ~ 1.
251.
5 ~ 1.
71.
7 ~ 2.
11.
High frequency quenched test specimen diameter 10 ~ 20mm, hard ply of temper by dipping in water 0.
05 ~ 0.
2mm. To large size part, β is reduced somewhat. 2.
Nitrogen changes a ply 0.
Little value is used when 01d, in 0.
03 ~ 0.
Great value is used when 04d. 3.
The β of gush bolus sclerosis, little value is used when gush bolus rate is low. Cementite 600700 ~ of 400 ~ 8001000 ~ 12001.
8 ~ 2.
01.
4 ~ 1.
51.
2 ~ 1.
332 gush bolus handles 600 ~ 15001.
1 ~ 1.
251.
5 ~ 1.
61.
7 ~ 2.
1 roller boils press 600 ~ 15001.
1 ~ 1.
31.
3 ~ 1.
51.
6 ~ 2.
In the fresh water of B (MPa)4005006007008009001000120013001400 of σ of β work requirement below 0 burn-in condition, stress is centered 0.
70.
630.
560.
520.
460.
430.
400.
380.
350.
In 33 fresh water, stress-free centers seawater in, stress is centered 0.
580.
50.
440.
370.
330.
280.
250.
230.
200.
In 19 seawater, stress-free is centered 0.
370.
30.
260.
230.
210.
180.
160.
140.
120.